1、修改启动时内存参数、并指定JVM时区 (在windows server 2008 下时间少了8个小时)
在Tomcat上运行j2ee项目代码时,经常会出现内存溢出的情况,解决办法是在系统参数中增加系统参数:
window下, 在catalina.bat最前面:
set JAVA_OPTS=-XX:PermSize=64M -XX:MaxPermSize=128m -Xms512m -Xmx1024m
一定加在catalina.bat最前面。
linux下,在catalina.sh最前面增加:
JAVA_OPTS="-XX:PermSize=64M -XX:MaxPermSize=128m -Xms512m -Xmx1024m -Duser.timezone=Asia/Shanghai"
注意:前后二者区别,有无set,有无双引号。
2、线程池配置(Tomcat6下)
使用线程池,用较少的线程处理较多的访问,可以提高tomcat处理请求的能力。使用方式:
首先。打开/conf/server.xml,增加
<Executor name="tomcatThreadPool" namePrefix="catalina-exec-"
maxThreads="500" minSpareThreads="20" maxIdleTime="60000" />
最大线程500(一般服务器足以),最小空闲线程数20,线程最大空闲时间60秒。
然后,修改<Connector ...>节点,增加executor属性,如:
<Connector executor="tomcatThreadPool"
port="80" protocol="HTTP/1.1"
connectionTimeout="60000"
keepAliveTimeout="15000"
maxKeepAliveRequests="1"
redirectPort="443"
....../>
注意:可以多个connector公用1个线程池。
3、调整连接相关Connector的参数:
<Connector executor="tomcatThreadPool"
port="80" protocol="HTTP/1.1"
connectionTimeout="60000"
keepAliveTimeout="15000"
maxKeepAliveRequests="1"
redirectPort="443"
maxHttpHeaderSize="8192" URIEncoding="UTF-8" enableLookups="false" acceptCount="100" disableUploadTimeout="true"/>
参数说明:
connectionTimeout - 网络连接超时,单位:毫秒。设置为0表示永不超时,这样设置有隐患的。通常可设置为30000毫秒。
keepAliveTimeout - 长连接最大保持时间(毫秒)。此处为15秒。
maxKeepAliveRequests - 最大长连接个数(1表示禁用,-1表示不限制个数,默认100个。一般设置在100~200之间) the maximum number of HTTP requests that can be held in the pipeline until the connection is closed by the server. Setting this attribute to 1 disables HTTP/1.0 keep-alive, as well as HTTP/1.1 keep-alive and pipelining. Setting this to -1 allows an unlimited number of pipelined or keep-alive HTTP requests. If not specified, this attribute is set to 100.
maxHttpHeaderSize - http请求头信息的最大程度,超过此长度的部分不予处理。一般8K。
URIEncoding - 指定Tomcat容器的URL编码格式。
acceptCount - 指定当所有可以使用的处理请求的线程数都被使用时,可以放到处理队列中的请求数,超过这个数的请求将不予处理,默认为10个。defines the maximum queue length for incoming connection requests when all possible request processing threads are in use. Any requests received when the queue is full are refused. The default value is 10.
disableUploadTimeout - 上传时是否使用超时机制
enableLookups - 是否反查域名,取值为:true或false。为了提高处理能力,应设置为false
bufferSize - defines the size (in bytes) of the buffer to be provided for input streams created by this connector. By default, buffers of 2048 bytes are provided.
maxSpareThreads - 做多空闲连接数,一旦创建的线程超过这个值,Tomcat就会关闭不再需要的socket线程 the maximum number of unused request processing threads that are allowed to exist until the thread pool starts stopping the unnecessary threads. The default value is 50.
maxThreads - 最多同时处理的连接数,Tomcat使用线程来处理接收的每个请求。这个值表示Tomcat可创建的最大的线程数。。 the maximum number of request processing threads to be created by this Connector, which therefore determines the maximum number of simultaneous requests that can be handled. If not specified, this attribute is set to 200.
minSpareThreads - 最小空闲线程数,Tomcat初始化时创建的线程数 the number of request processing threads that are created when this Connector is first started. The connector will also make sure it has the specified number of idle processing threads available. This attribute should be set to a value smaller than that set for maxThreads. The default value is 4.
minProcessors - 最小空闲连接线程数,用于提高系统处理性能,默认值为10。(用于Tomcat4中)
maxProcessors - 最大连接线程数,即:并发处理的最大请求数,默认值为75。(用于Tomcat4中)
备注:
Tomcat4中可以通过修改minProcessors和maxProcessors的值来控制线程数。
在Tomcat5+主要对以下参数调整
maxThreads
Tomcat使用线程来处理接收的每个请求。这个值表示Tomcat可创建的最大的线程数。
acceptCount
指定当所有可以使用的处理请求的线程数都被使用时,可以放到处理队列中的请求数,超过这个数的请求将不予处理。
connnectionTimeout
网络连接超时,单位:毫秒。设置为0表示永不超时,这样设置有隐患的。通常可设置为30000毫秒。
minSpareThreads
Tomcat初始化时创建的线程数。
maxSpareThreads
一旦创建的线程超过这个值,Tomcat就会关闭不再需要的socket线程。
4、负载均衡、集群的配置
Tomcat6支持分布式部署,可以实现集群功能,提高响应能力。
5、
利用JMX监控Tomcat运行情况,需要手工调整启动参数,如下:
打开cataline.bat,增加一行
set JAVA_OPTS=%JAVA_OPTS% -Dcom.sun.management.jmxremote.port=10090 -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.authenticate=false -Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager -Djava.util.logging.config.file="%CATALINA_BASE%\conf\logging.properties"
linux下修改cataline.sh:
JAVA_OPTS="-Dcom.sun.management.jmxremote.port=10090 -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.authenticate=false -Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager -Djava.util.logging.config.file=%CATALINA_BASE\conf\logging.properties"
注意JDK\jre\lib\management\management.properties文件必须存在。
重新启动tomcat节点,然后用jconsole连接(此处端口wei10090)
6、Tomcat增加一个应用
在server.xml的Host标签中增加行
<Context displayName="OA" docBase="/app/web-apps/GACWP" path="" />
path代表上下文名称,空表示是根路径。
转载地址:http://blog.sina.com.cn/cchao06
分享到:
相关推荐
TOMCAT内存溢出之解决方法
在生产环境中tomcat内存设置不好很容易出现内存溢出。造成内存原因是不一样的,当然处理方式也不一样。本文就介绍了Tomcat内存溢出的三种情况及解决办法分析
Tomcat内存溢出三种情况及解决办法,不同的异常采用不同的方式解决,不能盲目的增加内存就可以了。
LINUX部署tomcat内存溢出解决方案 已经使用过了,确实是好用的。
项目在tomcat下运行时,出现常见的几种内存溢出的解决方案
Eclipse + Tomcat 内存溢出参数设置
根据网上总结tomcat内存溢出的各种解决办法,很实用!
tomcat内存溢出处理方法适用于java,开发工具myeclipse或eclipse
eclipse tomcat启动,内存溢出问题
数据库更新工具 tomcat内存溢出解决办法 在Birt中使用Web Services数据源
按照压缩包里面的操作说明把对应文件拷贝进去就没问题了。
tomcat内存溢出,里面列出集中导出内存溢出的愿意和解决方案。
tomcat内存溢出解决办法,错误信息:java.lang.OutOfMemoryError:PermGen space 参考该文档可快速解决内存溢出的问题,服务器:tomcat
Tomcat内存溢出的解决方法(java.util.concurrent.ExecutionException:java.lang.OutOfMemoryError),内附解决方案!
程序运行要用到的内存大于虚拟机能提供的最大内存就发生内存溢出了, 内存溢出的问题要看业务和系统大小而定,对于某些系统可能内存溢出不常见,但某些系统还是很常见的解决的方法
tomcat内存溢出总结:堆溢出。永久保存区域溢出 等等各种常见内存溢出问题的解决方法
本文档记录了本人在不同系统上遇到tomcat内存溢出的各种问题,给出的解决方案。 详细记录。好东西要共享才有价值哦!